Discussion:
How to enable USB devices in K12LTSP
(too old to reply)
Barry R Cisna
2015-01-16 00:21:53 UTC
Permalink
Alain,

Any advancements on getting usb sticks to work on your k12ltsp install?
One thing in your message as far as user al, I never see the lower line
of this when i do an " id username"

uid=500(al) gid=500(al) grupos=500(al),101(fuse)
* i do not see this* context=user_u:system_r:unconfined_t

Did you do this build on CentOS 5?
If so it could be the id command reveals more detail than CentOS 6. Just
a guess?

It sounds like you are very close if you see the "Drives appear for user
all?
This build is about 6 years old now,and it does seem like there may have
been a tweak that needed to be done to get usb sticks to work,but I sure
don't remember what it is.
It sure sounds like you are trying as best you can to get to the bottom
of it.

Good Luck!

Barry
Alain Reguera Delgado
2015-01-20 02:07:27 UTC
Permalink
Post by Barry R Cisna
Any advancements on getting usb sticks to work on your k12ltsp install?
Well, I'm afraid no. I didn't find a solution inside K12LTSP.
Post by Barry R Cisna
One thing in your message as far as user al, I never see the lower line
of this when i do an " id username"
uid=500(al) gid=500(al) grupos=500(al),101(fuse)
* i do not see this* context=user_u:system_r:unconfined_t
Probably this is a silly question but, have you enabled SELinux when
you executed the id command?
Post by Barry R Cisna
Did you do this build on CentOS 5?
Yes, and then updated to CentOS 5.11.
Post by Barry R Cisna
If so it could be the id command reveals more detail than CentOS 6. Just
a guess?
I've haven't seen the output of id command on CentOS 6 recently, so I
need to take a look again in order tell you about it. I could have the
information tomorrow, if you are interested.
Post by Barry R Cisna
It sounds like you are very close if you see the "Drives appear for user
all?
This build is about 6 years old now,and it does seem like there may have
been a tweak that needed to be done to get usb sticks to work,but I sure
don't remember what it is.
It sure sounds like you are trying as best you can to get to the bottom
of it.
Yes. I've tried for almost two weeks and didn't find a solution,
sadly. I couldn't install a higher version of CentOS because the thin
clients report unsupported processor at boot time so, I opted to
install Edubuntu 14.04 LTS which, I must say, has been impressively
good detecting the old hardware I am administering. Now, the thin
clients boot fast, memory sticks worked as expected, users can listen
music while they surf the web, and the system has updates until 2019.

Best Regards,
al
William Fragakis
2015-01-22 17:16:32 UTC
Permalink
Hello all,
Barry and I have been communicating extensively off list regarding
install issues with EL7, especially the client build.

We've pretty much given up. It seems that whatever is left in the
repository is broken with current versions of Fedora and EL 6 or 7. I
know there have been changes in ldm on the server side and have no idea
if that's contributing to the situation.

Neither of us have the technical chops to begin to figure out what's
broken and how to fix it. Both of us have done K12ltsp/k12linux installs
for years so, while there may be user error, let's just say whatever is
the issue is beyond the reach of more experienced users.

For my use, EL7 has issues also since it's a 64 bit only distro. Clients
or programs which require i686 functionality can be problematic.
Princeton has done an i686 remix (Springdale) if that helps anyone.

The old repo is still available here:
http://repo.inode0.com/repo/ltsp/
the hawaii mirror is dead

I think this is a problem that has been creeping up on us since ltsp 5.2
began to break things such as hotplug usb.

Alain has found it easier going with Eduntu. I've found Debian quite
easy to get up and going myself. I think the hard part for a lot of us
is that we know our way around Fedora/EL and are loath to figure things
out on a different flavor.

K12LTSP/K12Linux has been fantastic for us. Moving forward, I think we
have to realize, unless something changes, we all have to move towards a
different solution. LTSP is still as relevant and useful as ever. My
thanks to all who have selflessly contributed time and effort to this.

Regards and best wishes to all,
William Fragakis
Message: 1
Date: Mon, 19 Jan 2015 21:07:27 -0500
To: "Support list for open source software in schools."
Subject: Re: [K12OSN] How to enable USB devices in K12LTSP
Content-Type: text/plain; charset=UTF-8
Post by Barry R Cisna
Any advancements on getting usb sticks to work on your k12ltsp install?
Well, I'm afraid no. I didn't find a solution inside K12LTSP.
Post by Barry R Cisna
One thing in your message as far as user al, I never see the lower line
of this when i do an " id username"
uid=500(al) gid=500(al) grupos=500(al),101(fuse)
* i do not see this* context=user_u:system_r:unconfined_t
Probably this is a silly question but, have you enabled SELinux when
you executed the id command?
Post by Barry R Cisna
Did you do this build on CentOS 5?
Yes, and then updated to CentOS 5.11.
Post by Barry R Cisna
If so it could be the id command reveals more detail than CentOS 6. Just
a guess?
I've haven't seen the output of id command on CentOS 6 recently, so I
need to take a look again in order tell you about it. I could have the
information tomorrow, if you are interested.
Post by Barry R Cisna
It sounds like you are very close if you see the "Drives appear for user
all?
This build is about 6 years old now,and it does seem like there may have
been a tweak that needed to be done to get usb sticks to work,but I sure
don't remember what it is.
It sure sounds like you are trying as best you can to get to the bottom
of it.
Yes. I've tried for almost two weeks and didn't find a solution,
sadly. I couldn't install a higher version of CentOS because the thin
clients report unsupported processor at boot time so, I opted to
install Edubuntu 14.04 LTS which, I must say, has been impressively
good detecting the old hardware I am administering. Now, the thin
clients boot fast, memory sticks worked as expected, users can listen
music while they surf the web, and the system has updates until 2019.
Best Regards,
al
------------------------------
_______________________________________________
K12OSN mailing list
https://www.redhat.com/mailman/listinfo/k12osn
End of K12OSN Digest, Vol 124, Issue 5
**************************************
j***@telenet.be
2015-01-23 16:26:26 UTC
Permalink
William,
thanks for letting us know.
For those who want an alternative for K12Linux but still want Centos of Fedora, maybe Thinstation is an option?
Greetings, Johan

----- Oorspronkelijk bericht -----
Van: "William Fragakis" <***@fragakis.com>
Aan: ***@redhat.com
Verzonden: Donderdag 22 januari 2015 18:16:32
Onderwerp: Re: [K12OSN] How to enable USB devices in K12LTSP

Hello all,
Barry and I have been communicating extensively off list regarding
install issues with EL7, especially the client build.

We've pretty much given up. It seems that whatever is left in the
repository is broken with current versions of Fedora and EL 6 or 7. I
know there have been changes in ldm on the server side and have no idea
if that's contributing to the situation.

Neither of us have the technical chops to begin to figure out what's
broken and how to fix it. Both of us have done K12ltsp/k12linux installs
for years so, while there may be user error, let's just say whatever is
the issue is beyond the reach of more experienced users.

For my use, EL7 has issues also since it's a 64 bit only distro. Clients
or programs which require i686 functionality can be problematic.
Princeton has done an i686 remix (Springdale) if that helps anyone.

The old repo is still available here:
http://repo.inode0.com/repo/ltsp/
the hawaii mirror is dead

I think this is a problem that has been creeping up on us since ltsp 5.2
began to break things such as hotplug usb.

Alain has found it easier going with Eduntu. I've found Debian quite
easy to get up and going myself. I think the hard part for a lot of us
is that we know our way around Fedora/EL and are loath to figure things
out on a different flavor.

K12LTSP/K12Linux has been fantastic for us. Moving forward, I think we
have to realize, unless something changes, we all have to move towards a
different solution. LTSP is still as relevant and useful as ever. My
thanks to all who have selflessly contributed time and effort to this.

Regards and best wishes to all,
William Fragakis
Message: 1
Date: Mon, 19 Jan 2015 21:07:27 -0500
To: "Support list for open source software in schools."
Subject: Re: [K12OSN] How to enable USB devices in K12LTSP
Content-Type: text/plain; charset=UTF-8
Post by Barry R Cisna
Any advancements on getting usb sticks to work on your k12ltsp install?
Well, I'm afraid no. I didn't find a solution inside K12LTSP.
Post by Barry R Cisna
One thing in your message as far as user al, I never see the lower line
of this when i do an " id username"
uid=500(al) gid=500(al) grupos=500(al),101(fuse)
* i do not see this* context=user_u:system_r:unconfined_t
Probably this is a silly question but, have you enabled SELinux when
you executed the id command?
Post by Barry R Cisna
Did you do this build on CentOS 5?
Yes, and then updated to CentOS 5.11.
Post by Barry R Cisna
If so it could be the id command reveals more detail than CentOS 6. Just
a guess?
I've haven't seen the output of id command on CentOS 6 recently, so I
need to take a look again in order tell you about it. I could have the
information tomorrow, if you are interested.
Post by Barry R Cisna
It sounds like you are very close if you see the "Drives appear for user
all?
This build is about 6 years old now,and it does seem like there may have
been a tweak that needed to be done to get usb sticks to work,but I sure
don't remember what it is.
It sure sounds like you are trying as best you can to get to the bottom
of it.
Yes. I've tried for almost two weeks and didn't find a solution,
sadly. I couldn't install a higher version of CentOS because the thin
clients report unsupported processor at boot time so, I opted to
install Edubuntu 14.04 LTS which, I must say, has been impressively
good detecting the old hardware I am administering. Now, the thin
clients boot fast, memory sticks worked as expected, users can listen
music while they surf the web, and the system has updates until 2019.
Best Regards,
al
------------------------------
_______________________________________________
K12OSN mailing list
https://www.redhat.com/mailman/listinfo/k12osn
End of K12OSN Digest, Vol 124, Issue 5
**************************************
_______________________________________________
K12OSN mailing list
***@redhat.com
https://www.redhat.com/mailman/listinfo/k12osn
For more info see <http://www.k12os.org>

Loading...